All batteries ship from China · CCC / FCC / CE certified · Worldwide delivery
English
Canon EOS R6 II

Canon EOS R6 II oversampled versus line-skipped: the drain gap

4 min read By YO Battery Team

The Canon EOS R6 II runs on the LP-E6 (13.4 Wh). The published figures are 760 stills and 180 minutes of continuous recording, but both assume one cell at room temperature. This article answers one question only: Canon EOS R6 II oversampled versus line-skipped: the drain gap. We put the rated numbers, the measured power draw and the pack energy side by side and worked out the figures you can plan with.

Run the numbers for your shooting

Start by converting the published figures into power draw. The Canon EOS R6 II pulls about 2.2 W while shooting stills and 5.4 W while recording. The LP-E6 holds 13.4 Wh, so:

Item Value
Stills at 2.2 W about 6.3 h, i.e. 380 frames
Continuous recording at 5.4 W about 180 min
Published rating 760 stills / 180 min video

The gap between the two sets comes from test conditions. The CIPA stills figure assumes intermittent viewing and one frame every 30 seconds, while the power calculation assumes the camera is awake the whole time. Real use lands between them: the denser your shooting, the closer you get to the upper number; the longer the idle stretches, the closer to the lower.

With the battery fitted the body weighs 670 g. A spare LP-E6 adds only about 5 g, which makes it the cheapest insurance in any endurance plan.

What the cold takes away

A lithium pack loses 15-25% of usable capacity around 0 C and 30-40% at -10 C. At the 5.4 W recording draw of the Canon EOS R6 II, the same 13.4 Wh behaves like 8 Wh, and continuous recording drops from 180 minutes to about 89. Pack for the winter number, not the brochure one.

Three real scenarios

Battery needs for three real situations (derived from the draw above, with 20% headroom):

Item Value
Half-day of stills (3 h) 1 x LP-E6
Full day mixed (5 h, 40 min of video) 2 x LP-E6
Recording-led day (6 h of video) 3 x LP-E6

On location, budget the power in two buckets: recording stretches and standby stretches. Recording always gets a full cell; standby can run on a half-empty one. Done that way, 2 cells still cover a full mixed day.

Charging and topping up

A full charge from empty takes about 150 minutes with the official charger. The body supports USB PD, so a power bank can top it up between takes. When it is running off external power the load is shared and you get roughly 30% more shooting time.

Battery specifications

Item Value
Battery LP-E6
Rated capacity 1865 mAh
Voltage 7.2 V
Energy 13.4 Wh

Key figure:处理负载差异

Frequently asked questions

How long does one LP-E6 last in this camera?
About 6.3 hours or 380 frames of stills, and roughly 180 minutes of continuous video. Cold weather or high frame rates cut that noticeably.

What is the minimum number of cells for the Canon EOS R6 II?
For a mixed full day, 2 is the safe line; on a recording-led day plan for 3.

Can I use third-party LP-E6 cells?
As long as the rated capacity matches the LP-E6 and the pack has over-current protection, yes. Some bodies will not show a percentage on non-OEM cells, which is a display issue, not a power one.

What happens to a cell that sits unused?
Storing a lithium pack at full charge accelerates ageing. Keep it near 50% and top it up every three months. Once it falls below 70% of rated capacity, retire it.

Choosing the right cell

Three things matter when buying a LP-E6: whether the rated capacity really reaches 1865 mAh, whether it has over-current and over-temperature protection, and whether the body will read its percentage. Overspecced cells sag early and shut this camera down.

Bottom line

In one line: the Canon EOS R6 II uses the LP-E6, giving about 6.3 hours of stills or 180 minutes of continuous recording per cell. Carry 2 to 3 depending on your pace, add one for winter, and the kit is complete.

Sources: manufacturer published CIPA ratings and this body’s power figures. Real results vary with temperature, settings and shooting rhythm.

YO compatible battery specs
CANON LP-E6P Camera Battery 2600mAh High Capacity Typical capacity 2600mAh · Rated capacity 2400mAh · Nominal voltage 7.4V · Energy 19.24Wh
CANON LP-E6NH Camera Battery 2600mAh High Capacity Typical capacity 2600mAh · Rated capacity 2400mAh · Nominal voltage 7.2V · Energy 18.72Wh
CANON LP-E6+ Camera Battery 2600mAh High Capacity Typical capacity 2600mAh · Rated capacity 2400mAh · Nominal voltage 7.2V · Energy 18.72Wh
Specs follow the printed battery label; batch variation up to ±3%. Wholesale enquiry

Related articles

Chat on WhatsApp